User's Manual

To exit from the Configuration Editor, return to the Configuration Menu
screen (figure 4-3). At the Enter selection prompt, press
[Return]. At the option
Back To Menu ?
use the [>] or [<] key to select either Save and Exit ? (if you want to
save any changes you have made) or Exit without Saving ? (if
you don’t want to save any changes you have made) Pressing [Return] for
either one then returns you to the Main menu.
To implement the changes you make in a Configuration Editor ses-
sion, do the following:
a. Choose Save and Exit.
b. Boot the router (by using the NCL Boot command--refer to page
7-8).
To abandon the changes made in this Configuration Editor session
and keep the previous configuration, choose
Exit without Saving
and press [Return].
Configuration
Editor
4
How To Use the Configuration Editor
How To Operate the Configuration Editor
4-15