User's Manual

2. Type / . You will then see the hotkey menu. For example, with an
X.25 circuit type of PDN, you will see the following menu:
The ‘‘L’’ and ‘‘R’’ options access parameters you need to provide for
minimal X.25 operation (described in the procedure to configure for
minimal X.25 operation—page 3-18). The remaining options (listed
below) give you access to default parameters you can change as
required for non-minimal X.25 (and other) configurations:
• E Edit virtual circuit parms (DDN only)
• X Edit other X.25 parms
• C Edit circuit parms
• M Main configuration menu
3. Type the letter for the option you want. You will then see the corre-
sponding Configuration Editor screen. After you have entered your
changes, press [Return] as many times as necessary to return to the
Quick Configuration screen.
4. Press the [Ctrl] [C] key combination to display the ‘‘save and exit’’
prompt:
Save configuration and exit Quick Configuration
(y/n?)
Figure 3-20. Hotkey Assignments
Quick
Configuration
3
How To Use Quick Configuration
How To Configure for X.25
3-25