User's Manual

default parameters ... 3-27
editing ... 3-12 – 3-14
effect on Configuration Editor ... 1-9
exiting ... 3-9
exiting without saving ... 3-11
fields ... 3-7
Help ... 3-5
hot swapping interface modules ... 3-31
hotkeys ... 3-5
moving among fields ... 3-8
parameters affected ... 3-2
port differences ... 3-3
ports ... 3-7
removing interface modules ... 3-32
scrolling ... 3-7
starting ... 3-6
X.25 ... 3-16 – 3-26
Quick remote ... 1-7
Bootp request message ... 8-6
bridging ... 8-9
data fields ... 8-7
delete assignment ... 8-13
exit ... 8-8
hotkeys ... 8-14
how it operates ... 8-5
IP ... 8-11
IPX ... 8-11
LAN port to use ... 8-3
LAN ports ... 8-11
navigation ... 8-10
navigation in screen ... 8-8
Point-to-Point link ... 8-4
procedure ... 8-2
save and exit ... 8-12
saving the configuration ... 8-8
screen layout ... 8-7
set-up ... 8-4
SNMP settings ... 8-15
starting ... 8-9
TFTP ... 8-14
TFTP put ... 8-14
TFTP security ... 8-11
WAN port addressing ... 8-11
WAN port correspondence ... 8-10
WAN port operation ... 8-5
WAN port to use ... 8-3, 8-7
Quickr ... 7-8
Quit, event log ... 5-4
R
Reboot
See boot
Reboot prompt ... 3-23
REBOOTING THE SYSTEM ... 3-10, 3-23,
3-26
Redirecting display output ... 7-22
Refresh
statistics screens ... 6-6
Release notes ... 1-2
Remote DTE address ... 3-20
Remote router ... 8-2
Removing an interface module ... 3-33
Repeat ... 7-8
Reset ... 7-16, 7-21
Reset button ... 3-28, 8-2
Reset, statistics screen ... 6-6
Reset/clear button combination ... 3-27
RFC 1156 ... 7-2
rget ... 7-24
rgeta ... 7-22, 7-25
rgetat ... 7-25
rgetata ... 7-25
rgetatr ... 7-25
rgetb ... 7-25
rgetd ... 7-25
rgetda ... 7-25
rgetdn ... 7-26
rgeti ... 7-22, 7-26
rgetif ... 7-26
rgetir ... 7-26
rgetis ... 7-26
rgetm ... 7-24
rgetms ... 7-22
rgetmw ... 7-23
rgetr ... 7-22, 7-26
rgets ... 7-22
rgetw ... 7-23
rgetxr ... 7-26
Ring interface ... 3-27
Index
6-Index