Installation Manual

C. Attach Network Cables

Depending on the model of router and the physical connections in your

network, you will use one or more of the following interface options:

AUI (page 1-12)

BNC (page 1-14)

Token Ring (page 1-16)

FDDI (page 1-17)

WAN (page 1-21)

Caution Static discharge may damage equipment. Do not touch the router

connector pins or the cable connector pins.

Note On routers providing an AUI interface and a BNC interface for the same

LAN 802.3 port, you can use either interface at any time, but not both at

the same time. For information on the operation of the green LEDs

indicating AUI or BNC interface selection, refer to ‘‘AUI and BNC

(green) LEDs’’ on page 2-10.

Installation

Phase 3: Prepare the Router Hardware

1-11