User's Manual

Entering and Navigating in the

Event Log Display

You can enter the event log in either of the following two ways:

In the Main menu (figure 1-1 on page 1-6), press [4] to display the

Event Log.

In the NCL interpreter, execute the Logi command.

Note Event log messages in the HP Series 600 routers include, where appropri-

ate, the slot number associated with the source of a displayed event.

Event log messages in HP Series 200 and 400 routers do not use slot

numbers. For example:

S 600:

S 200/400:

I 07/04/94 16:17:44 mgr.auto_enable: ‘auto-enabling ’cct.WAN21’‘

I 07/04/94 16:17:44 mgr.auto_enable: ‘auto-enabling ’cct.WAN1’‘

When you first display the event log, the first event of the most recent

reboot is positioned at the top of the display. (See the first two lines of

Figure 5-1. Example of an Event Log Display

Event Log

How To Use the Event Log

Entering and Navigating in the Event Log Display

5-3