User's Manual

The remaining items (including some that are not available on all
models) provide tools for adjusting application or network management
software modules to your requirements. Access only the items
corresponding to the application or network management software
modules you want to enable.
7. DoD Internet Router
8. DECNET IV Routing Service
9. SNMP Sessions
10. Xerox Routing Service
11. IPX Routing Service
12. AppleTalk Router
13. X.25 Network Service
14. V.25 bis Network Mapping
Moving From One Screen to Another
At the bottom of the Configuration Menu screen (figure 4-3) and many
other screens is the prompt:
Enter selection (0 for previous menu): _____
Whenever this prompt occurs, it is preceeded by a numbered list of
items you can select. If you don’t want to access any of the listed items,
just press [Enter] to return to the preceding screen or action item. But if
you want to access one of the listed items, type the number for that item
and press [Enter]. Then:
If the item you select contains no entries (indicated by ‘‘(0)’’ at the
end of the item) such as:
DoD Internet Router (0)
you will be prompted by the message
Do you wish to add ...? Yes
How To Use the Configuration Editor
How To Operate the Configuration Editor
4-10