User's Manual

2. Type y and press [Return]. You will then see the reboot prompt:
3. Type y again and press [Return] to reboot the router.
While the router is rebooting, the console displays
REBOOTING THE SYSTEM
When you see the message
Waiting for speed sense
the router has finished rebooting. Any configuration changes you
made prior to exiting and rebooting will be implemented in the
router configuration.
Note If you are configuring a remote router via Telnet or a modem, the link
will be interrupted by the reboot, and the ‘‘Waiting for speed sense’’
message will not appear. In this case, you will have to re-establish the
remote connection to return to the remote router’s Main menu.
The
reboot
prompt
Figure 3-7.The Reboot Prompt
How To Use Quick Configuration
How To Create a Configuration
3-10