User's Manual

3. Start a Quick Configuration session. (Press [6].)
When the ‘‘Welcome...’’ screen appears, press [Return]. The console
then displays the Quick Configuration screen. The ports shown will
correspond to the router model you are configuring.
There are nine fields for each port configuration:
Brg
Enab
DoD IP
Address
DoD IP
Subnet
Mask
IPX
Network
Port
Conf
WAN Port
Parameters
AppleTalk Net
Range
AppleTalk Zone
Name
DECnet
area.node
These fields appear in the initial Quick Configuration
Screen
Use [>] to scroll to these fields or wrap to the first
column, and [<] to scroll back to the left or to wrap
to the last column
Cursor positioned at
System name field
Data entry field
Ports
Figure 3-4. Example of a Quick Configuration Screen
Quick
Configuration
3
How To Use Quick Configuration
How To Create a Configuration
3-7