User's Manual

How To Create and Save a Quick
Remote Configuration
The main steps to creating and storing a configuration in Quick Remote
for use by an remote router are:
1. Start Quick Remote on the central router.
2. Select the WAN port through which you want to make the
configuration available to a remote HP router.
3. Enable or disable bridging and enter a minimal set of IP and/or IPX
configuration values.
4. Save the new configuration and exit from Quick Remote.
To start Quick Remote and enter a minimal configuration:
1. Plan the Quick Remote parameters for the remote router(s).
2. Display the Main menu on the central router.
3. Start a Quick Remote session. (Press [7].) When the ‘‘Welcome’’
screen appears, press [Return]. The console then displays the Quick
Remote screen.
Quick Remote
8
How To Use Quick Remote
How To Create and Save a Quick Remote Configuration
8-9