User's Manual

How To Exit From the
Configuration Menu
If you enter the Configuration Editor from the Main menu, do
the following to exit:
1. Press [Return] as many times as you need to return to the Configuration
menu (figure 4-2).
2. Press [Return] once again to display
Back to menu ?
3. Then do one of the following:
• If you want to exit from the Configuration Editor without saving
any changes you made, press [<] to display
Exit without saving ?
Then press [Return] again to exit from the Configuration Editor
without saving any changes you made.
• If you want to exit from the Configuration Editor and save any
changes you made, press [>] twice to display
Save and exit ?
Then press [Return] again to exit and save any changes you made.
Note ‘‘Saving’’ a new configuration retains it in memory, but does not delete
the ‘‘old’’ configuration nor re-initialize the router with the new configu-
ration. To re-initialize the router with a new configuration that you have
just saved, reboot the router (or turn the power off, then on again). To
reboot the router, use the boot command (page 7-8 in this manual; refer
also to the description of the boot command in the Operator’s
Reference’’.
How To Use the Configuration Editor
How To Exit From the Configuration Menu
4-6