User's Manual

4. Type the system name and press [Return]. The new system name then
appears in the ‘‘System name’’ field and the cursor moves to the next
field.
• If you don’t want to change the data in the selected field, just
press [Return] to move to the next field.
• If you want to skip over several fields, you can do so by using the
cursor keys ([^], [v], [<], and [>]) or [Tab] to select the next field you
want.
Also, pressing [<] when the cursor is in the first (‘‘Brg Enab’’)
column ‘‘wraps’’ the cursor to the last (‘‘DECnet area.node’’)
column in the preceeding row. Similarly, pressing [>] when the
cursor is in the last (‘‘DECnet area.node’’) column ‘‘wraps’’ the
cursor to the first (‘‘Brg Enab’’) column in the following row.
5. Type the data for the next parameter, then press [Return] again. Repeat
this step until you have entered data for all needed fields.
Figure 3-5. Use the [>] Key To Scroll the Display to Additional Parameters
How To Use Quick Configuration
How To Create a Configuration
3-8