User's Manual

has parameters and thus includes a space, then enclose the com-
mand string in double quotes.
filename is the name of the configuration or operating code file on
the remote host. On an HP Router CR, it can also be the name of the
configuration file.
x.x.x.x is the IP address of the remote host.
Command Function
fget X.X.X.X operator filename Initiate a TFTP read request from a specific host or
router for the configuration or operating system.
Note: Fget does
not use NCL-command.
fput X.X.X.X NCL-command filename Initiate a TFTP write request to a specific host or to
an HP Router CR for the configuration or operating
system or display command output.
NCL
Commands
7
How To Use the Network Control Language (NCL) Commands To Manage a Router
Using TFTP To Transfer Operating Code, Configuration, and NCL Display
7-31