User's Manual

Command Function
! [repetitions] Repeats the preceeding NCL command once or a number of
times
atping X.X [wait] Send an AppleTalk Echo Protocol request to another AppleTalk
node.
boot Reboot the router.
browse Display the entire current configuration in Configuration Editor
format.
config Display the entire current configuration, in machine-readable
format.
crash Display the router’s shutdown history.
date
[mm/dd/yy] [hh:mm:ss] Set or display the router’s current date and time.
disable [identifier] Disable a protocol, service, circuit, or other configuration entity.
edit Invoke the Configuration Editor without leaving NCL.
enable [identifier] Enable a protocol, service, circuit, or other configuration entity.
exit Leave NCL and return to the Main menu.
help [type] Get help for NCL commands (rget, zmodem, ospf,
other, all).
log
log filter
Examine, and optionally filter, the internal event log.
logi Invoke the automatically updating Event Log without leaving
NCL.
page Disable and re-enable display-paging mode for the console.
password Assign, change, or remove password protection on the router.
ping X.X.X.X [count] [wait] Send an Internet Control Message Protocol echo request to
another node.
print Direct NCL display command output to a printer or file.
quick Invoke Quick Configuration without leaving NCL.
quickr Invoke Quick Remote without leaving NCL.
repeat Continually repeat the last NCL command until another key is
pressed.
How To Use the Network Control Language (NCL) Commands To Manage a Router
General NCL Command Summary
7-8