Installation Manual

LEDs and Buttons
Status LEDs
The status LEDs are located on the router module’s cover plate.
For information about what is indicated by each of these LEDs, refer to
table 3-1, “Status LEDs”, on the next page. For information on trou-
bleshooting using these LEDs, refer to chapter 4, “Troubleshooting”.
Router Self-test
SNMP Mgt (module) Fault
Hub (LAN) Net Fail
Hub (LAN) Router Rx
Hub (LAN) Router Tx
WAN Net Fail
WAN Rx
WAN Tx
Router Fault
Figure 3-1. Status LEDs
Operation
LEDs and Buttons
3-2