Installation Manual

A-1

Cable Specifications

This appendix provides the following pinout information:

■ Console and Auxiliary Port Signals and Pinouts

■ Synchronous Serial Cable Assemblies and Pinouts

■ ISDN BRI Port and Cable Pinouts

NOTE

All pins not listed in the tables in this appendix are not connected.

If you prefer to order cables, refer to the section “Ordering Information” in

chapter 1 “HP AdvanceStack Internet Router Overview” for ordering

information.

Console and Auxiliary Port Signals and

Pinouts

Your router comes with a console and auxiliary cable kit, which contains the

cable and adapters you need to connect a console terminal (an ASCII terminal

or PC running terminal emulation software) or modem to your router. The

console and auxiliary cable kit includes the following items:

■ RJ-45-to-RJ-45 roll-over cable. (See the next section, “Identifying a Roll-

Over Cable” for more information.)

■ RJ-45-to-DB-9 female DTE adapter (labeled “TERMINAL”).

■ RJ-45-to-DB-25 female DTE adapter (labeled “TERMINAL”).

■ RJ-45-to-DB-25 male DCE adapter (labeled “MODEM”).

For console connections, proceed to the section “Console Port Signals and

Pinouts” later in this appendix; for modem connections, proceed to the section

“Auxiliary Port Signals and Pinouts” later in this appendix.

J3138.bk Page 1 Wednesday, March 18, 1998 6:07 PM