Reference Guide

ZCOM C I/F Library Routines

ZPORT (3X)

Chapter 4278

PAR AMETER S iftno ACC MUX interface number.

portno Port number in the ACC interface card:

rcode Request code:

1 - Use configuration in interface table

2 - Use data in cnfg

action Configuration type:

stat

(Return Param) Status returned from the call:

0..

For Z7200A, Z7340A and Z7400A ACC

interface cards

0..

For the Z7300A ACC interface card

0..

For the Z7350A ACC interface card

ZCOM_ZMUXPORT_ALL (0) - Set all modes (all fields)

ZCOM_ZMUXPORT_CONF (1) - Set Configuration mode only

(Ecode, Mode, Parity)

ZCOM_ZMUXPORT_BAUD (2) - Set Baud Rate mode only (X.Clk,

S.Clk, Baud Rate)

ZCOM_ZMUXPORT_PORT (3) - Set Port mode only (Pmode,

Pmode2)

ZCOM_ZMUXPORT_BRK (4) - Port Break request

PT_OK (0) - No error

PT_INV_PORT (1) - Port number out of range

PT_BAD_PARM (2) - Bad parameter

PT_NOT_DSBL (3) - Some terminals in this port not disabled

PT_BAD_BAUD (4) - Bad baud rate

PT_ILL_SCLK (5) - Illegal clock source