Reference Guide

ZCOM C I/F Library Routines
ZCONFIG (3X)
Chapter 4 213
Configuration Data
header.config
ZCOM_ZCONFIG_PORTSC (port and subchannel configuration)
header.action
header.tag1,
header.tag2
Any values.
data.setportsc.iftno
Interface card number (0, 1,...).
data.setportsc.portno
Port number in E1/T1 interface card (0...3).
data.setportsc.subchno
Subchannel number within the port (0...31).
ZcDSC_ALL_PARMS (1) - Set all operating modes
(Configuration, Baud Rate and Port)
ZcDSC_CFG_MODE (2) - Set Configuration mode only
(Ecode, Sync, Mode, Parity)
ZcDSC_BAUD_RATE (3) - Set Baud Rate mode only (S.Clk)
ZcDSC_PORT_MODE (4) - Set Port mode only (Pmode)
ZcDSC_BREAK_REQ (5) - Port Break request
ZcDSC_SET_XMIT_LIMIT (6) - Modify port transmit limit
ZcDSC_ENABLE_PORT (7) - Enable a port
ZcDSC_DISABLE_PORT (8) - Disable a port
ZcDSC_ENABLE_SUBC (9) - Enable a subchannel
ZcDSC_DISABLE_SUBC (10) - Disable a subchannel
ZcDSC_SET_TIMESLOTS (11) - Set timeslot assignment
ZcDSC_SET_SUBC_SPECS (12) - Set subchannel specification