Reference Guide

ZCOM C I/F Library Routines
ZCONFIG (3X)
Chapter 4 209
data.setport.qlimit
New port limit (in bytes). This field is for action ZcDSC_SET_XMIT_LIMIT
only.
Response Data
T1/ESF PRMs transmitted as “carrier”. The
performance report messages transmitted in T1/ESF
mode contain an address which indicates whether
the ACC is a “network” or “user” device. By default
the ACC is a “user” device.
NP 1 =
On
T1/ESF performance report messages suppressed
This option suppresses the transmission of
performance report messages in T1/ESF mode.
LH 1 =
On
Long-haul mode (Z7330B only)
Enables the receive equalization and high power
transmit line.
CF 1 =
On
Reduced corner frequency (Z7330B only)
The corner frequency at which jitter
attenuation begins, is reduced by a factor of ten by
setting this option.
JP 1 =
On
JT G.706 mode (Z7330B only)
In T1/ESF mode the CRC6 is calculated and
the remote alarm processed according to JT G.706
(Japanese variation) by setting this option.