Reference Guide

ZCOM C I/F Library Routines
ZCONFIG (3X)
Chapter 4204
The baud rate is split between two 4-bit parameters (for compatibility
reasons). If the Baud 1 parameter is 0, then Baud 2 is used. Rates listed in
bold are not available on the Z7340A and Z7350A interface cards. Baud rates
above 76800 are not supported on the Z7200A card and rates above 128000
are not supported for the Z7400A card.
Parity Value Parity select
0 0 No Parity
0 1 Odd parity
1 0 No Parity
1 1 Even parity
X.Clk Value Clock multiplier
0 0 X 1
0 1 X 16
1 0 X 32
1 1 X 64
S.Clk Value Clock source
0 0 External clock
0 1 Internal clock from Baud Rate Generator (BRG)
1 0 X.21 clock source
1 1 DPPL output (must use BRG as source)
Baud 1 Value Rate Value Rate
0000 Use Baud2 1000 19,200