Reference Guide

ZCOM C I/F Library Routines
ZCONFIG (3X)
Chapter 4 203
Unused spare field. For data alignment.
data.setport.cnfg
Configuration data (32 bits). This field is used for actions 1 to 4 only. The
content is dependent on the specific hardware being configured. It contains
the following information:
For the Z7200A, Z7400A, Z7340A, Z7350A cards:
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Ecode Sync Mode Parity X. Clk S. Clk Baud 1
Pmode Pmode2 Baud 2 0 = Not Used
Ecode Value Encoding modes
0 0 NRZ
0 1 NRZI
1 0 FM1 (transition = 1)
1 1 FM0 (transition = 0)
Sync Value Sync mode select
0 0 8-Bit sync (monosync)
0 1 16-Bit sync (bisync)
1 0 SDLC Mode
1 1 External sync
Mode Value Operating mode
0 0 Sync mode
0 1 Async 1 stop
1 0 Async 1.5 stop bits
1 1 Async 2 stop bits