Reference Guide

ZCOM C I/F Library Routines
ZCONFIG (3X)
Chapter 4200
Configuration Data
header.config
ZCOM_ZCONFIG_CARD (interface configuration)
header.action
header.tag1,
header.tag2
Any values
data.setcard.iftno
Interface card number (0, 1,...)
data.setcard.bc1_addr
data.setcard.bc_addr
data.setcard.card_addr
These are the bus converter address and card address (as specified in a
TTGEN configuration file) of the new hardware. These fields are needed for
action 2 and 6 only.
data.setcard.itype
Interface card type. This indicates the hardware type of the new interface
card. Currently, the types ZCOM_ITYPE_MUX, ZCOM_ITYPE_Z7200A,
ZCOM_ITYPE_Z7300A, ZCOM_ITYPE_Z7340A, ZCOM_ITYPE_Z7350A,
and ZCOM_ITTYPE_Z7400AR are supported. This field is needed for action 2
only.
data.setcard.fname
New firmware file name. This field is used for action 1 only.
ZcDSC_CHNG_FW_FILE (1) - Modify interface firmware file name
ZcDSC_CREATE_IFT (2) - Create a new interface table
ZcDSC_START_CARD (3) - Startup (e.g. restart) an interface card
ZcDSC_HALT_CARD (4) - Disable an interface
ZcDSC_STOP_CARD (5) - Shutdown (e.g. disable and flush) an
interface card
DSC_REASSIGN_IFT (6) - Link an interface to different hardware