Troubleshooting guide

C–2 335795-006 Troubleshooting Guide
Configuring a PXE Server under Microsoft RIS
2. From the Windows Control Panel, double-click on
Add/Remove Programs.
3. Double-click Add/Remove Windows Components.
4. Select Remote Installation Services, then click Next. (Insert
Windows 2000 Server CD into the CD-ROM drive, if
prompted.)
5. Restart the computer after the wizard has finished installing
the service.
Authorizing Remote Installation Services
(RIS PXE Server)
If you have installed RIS on a server other than the server
running DHCP, authorize PXE with DHCP as follows:
1. Record the IP address of the RIS PXE Server.
2. Log on to the DHCP Server as administrator.
3. From the Control Panel, double-click Administrative Tools.
4. Double-click DHCP.
5. Right-click DHCP (just above the domain name) and select
Manage Authorized Servers.
6. Click Authorize.
7. Type the IP address of your RIS PXE server and click OK.
8. Click OK.
9. Log off from the DHCP Server.
Configuring Remote Installation Services
Use the default option to have RIS install on second hard drive
(D:\ or E:\).
1. Click Start > Run.