Troubleshooting guide

5–8 335795-006 Troubleshooting Guide
Restoring the Flash Image
Deploying with PXE
1. Ensure that IBR.exe and Flash.img are stored in the same
directory on the server.
2. Add [full path]\IBR.exe -y [full path]\Flash.img hd0 to the
PXE command file, and run it.
To view the IBR command line options:
At the command prompt, type IBR.EXE /? and press Enter.
Refer to "Appendix C: Configuring a PXE Server" for
instructions on setting up a PXE Server using Microsoft RIS. See
your documentation if using a different PXE server, such as
Altiris Deployment Solution.