Troubleshooting guide

Diagnostics and Troubleshooting
Troubleshooting Guide 335795-006 4–31
2. If you are running in an MS RIS PXE environment press the
F12 key to activate the network service boot as soon as the
DHCP IP information appears on the screen.
❏ If the unit does not boot to the network the server is not
configured to PXE.
❏ If you missed the F12 cue, the system will try to boot to
the ATA flash that is not present. The message on the
screen will read:
ERROR: Non-system disk or disk error. Replace and press
any key when ready.
❏ Pressing any key will restart the boot cycle.
3. If you are running in a Linux environment an error message
will appear on the screen if there is no Client IP.
ERROR: Non-system disk or disk error. Replace and press
any key when ready.