Troubleshooting guide

3–2 335795-006 Troubleshooting Guide

HP t5000 Series Setup (F10) Utility

Task Headings: Load Factory Defaults, Set Administrative

Password, Set User Password, Save & Exit Setup, and Exit

without Saving.

4. Use the arrow (up and down, or left and right) keys to select

the appropriate heading, then press the

Enter key. To return

to the Setup Utility menu, press the

Esc key.

5. To apply and save changes, select Save and Exit Setup.

❏ If you have made changes that you do not want applied,

select Exit without Saving.

❏ To reset to factory settings, select Load Factory

Defaults. This option will restore the original factory

system defaults.

CAUTION: Do NOT turn the computer power OFF while the ROM is

saving your F10 Setup changes because the CMOS could become

corrupted. It is safe to turn off power to the computer ONLY after you

exit the F10 Setup screen.