HP BUSINESS NOTEBOOK PC F10 SETUP OVERVIEW 2011 Business Notebook Models Technical white paper

Table 1. (Continued) Key features for F10 Setup on select 2011 HP business notebook PCs
Feature
Function
Default Setting, if applicable
SECURITY MENU
User Tools
Change Password
Change BIOS user password
N/A
HP SpareKey Enrollment
Allows for user configuration of HP
SpareKey - answer any three of
ten questions for enrollment
N/A
Anti Theft
Allows for configuration of Intel
Anti Theft feature
Enabled
DriveLock Password
Allows for configuration of
DriveLock Master and User
passwords
Disabled
Automatic DriveLock
2
Requires BIOS Admin password
Disabled
TPM Embedded Security
Manage the TPM module settings
2
 Embedded Security
Device Availability
Exposes the integrated TPM
module
Available
 Embedded Security
Device State
Enables the integrated TPM
module
Disabled
 Factory Defaults
Set TPM Embedded Security
settings to factory default
N/A
 Power-On
Authentication Support
Enables multi-factor authentication
at power on
Disabled
 Reset Authentication
Credential
Resets credentials
No
 OS Management of
TPM
Allow the operating system to
manage TPM module
Enabled
 Reset of TPM from OS
Allows reset of TPM module from
within the operating system
Disabled
Disk Sanitizer
3
Performs erasure of all data on
selected hard drive; typically used
prior to repurposing or donation
(Not supported under RAID mode)
N/A
2 –BIOS Administrator password is required
3 - For the use cases outlined in the DOD 5220.22-M Supplement