Datasheet

ASF 2.0 Compliant No.
Instantly Available PC
(Suspend to RAM - ACPI
sleep state S3)
Allows for very low power consumption with quick resume time.
Remote System
Installation via F12
(PXE 2.1) (Remote Boot
from Server)
Allows a new or existing system to boot over the network and download software, including the
operating system.
ROM revision levels Reports the system BIOS revision level in Computer Configuration Utility (F10 Setup). Version is
available through an industry standard interface (SMBIOS) so that management SW applications
can use and report this information.
System board revision
level
Allows management SW to read revision level of the system board.
Revision level is digitally encoded into the HW and cannot be modified.
Start-up Diagnostics
(Power-on Self-Test)
Assesses system health at boot time with selectable levels of testing.
Auto Setup when new
hardware installed
System automatically detects addition of new hardware.
Keyboard-less
Operation
The system can be booted without a keyboard.
Localized ROM Setup Common BIOS image supports System Configuration Utility (F10 Setup) menus in 12 languages
with local keyboard mappings.
Asset Tag Enables the user or IT administrator to set a unique tag string in non-volatile memory.
Per-slot Control Allows I/O slot parameters (option ROM enable/disable, bus latency) to be configured
individually.
Adaptive Cooling Control parameters are set according to detected hardware configuration for optimal acoustics.
Pre-boot Diagnostics (Pre-video) critical errors are reported via beeps and blinks on the power LED.
Intel® Active
Management
Technology (AMT)
AMT 8.0; Allows workstation status to be monitored on a remote console
Digitally and
Cryptographically
Signed BIOS
Helps to prevent the installation of unauthorized versions of a BIOS (a rogue BIOS) from a virus,
malware, or other code that could lead to compromised system security, data access, physical
service, or even system board replacement.
Master Boot Record
Protection
A feature in the HP BIOS that prevents changes and/or infections to the Master Boot Record.
Useful in protecting from viruses
Boot Block Emergency
Recovery Mode (BIOS
Recovery)
The HP BIOS offers a write-protected boot block ROM that provides recovery from a failed
flashing of the computer BIOS. This special recovery mode prevents the system from becoming
unusable or "bricked" when a BIOS update is interrupted.
Industry Standard
Specification Support
UEFI Specification
Revision
UEFI 2.3.1
Industry Standard Revision Supported by the BIOS
ACPI Advanced Configuration and Power Management Interface, Version 2.0c
ASF Alert Standard Format Specification, Version 2.0
ATA (IDE) AT Attachment 6 with Packet Interface (ATA/ATAPI-6), Revision 3b
CD Boot "El Torito" Bootable CD-ROM Format Specification Version 1.0
EDD - Enhanced Disk Drive Specification Version 1.1
- BIOS Enhanced Disk Drive Specification Version 3.0
EHCI Enhanced Host Controller Interface for Universal Serial Bus, Revision 1.0
QuickSpecs
HP Z220 CMT Workstation
System Technical Specifications
DA - 14286 Worldwide QuickSpecs — Version 15 — 6.1.2013 Page 22