- Hewlett-Packard Tool Storage User Manual

& Diagnostics
Infor
79
Troubleshooting
Byte
-13 Description
31 00 Medium format corrupted
31 01 Format failed
32 00 No defect spare location available
37 00 Parameter rounded
3D 00 Invalid bits in identify message
3E 00 LUN has not yet self-configured
3F 00 Target operating conditions have changed
3F 01 Microcode changed
3F 02 Changed operating definition
40 01 DRAM parity error
42 00 Power-on or self-test failure
43 00 Message error
44 00 Internal target failure
45 00 Select/reselection failure
47 00 SCSI parity error
48 00 Initiator detected error message received
49 00 Invalid message error
4C 00 LUN failed self-configuration
4E 00 Overlapped commands attempted
5B 00 Log exception
5B 01 Threshold condition met
5B 02 Log counter at maximum
5B 03 Log list codes exhausted
5C 00 RPL status change
5C 01 Spindles synchronized
5C 02 Spindles not synchronized
65 00 Voltage fault
80 00 General firmware error qualifier