- Hewlett-Packard Tool Storage User Manual

& Diagnostics
Replacement Procedures
Step 4
If the disk is not the mirror of a root disk, skip this step.
Run the mkboot command. For the above exampl
# mkboot /dev/rdsk/c2t4d0
b. lvlnboot - command to re-
Area of all the Physical Volumes in the Volume Group:
-R
If the host fails during Step 4
when the host failed. The mkboot lvlnboot - commands
are repeatable with no harm.
Step 5
-synchronize the mirrors of the replaced disk module. This will take some time because it copies all the
d extents. The logical volumes are still accessible to
users' applications during this command:
# vgsync <VG name>
# vgsync /dev/vg00
If the host fails during Step 5
-issue the command.