Technical data

97060A Environmental/Installation/PM 2-3
CAUTION
ENSURE THAT THE 97060A IS CONFIGURED TO MATCH THE
INPUT LINE VOLTAGE.
7. Connect power cords to the 97060A, the monitor, and optionally to the 9111A.
8. Turn on power to the computer,
97060A, monitor, and optionally the 9111A.
9. If the computer is a Model 520, load the System Integrity Test and run the 97060 test.
10.
If necessary, adjust the monitor's horizontal and/or vertical hold to get a stable picture.
Preventive Maintenance
There are no preventive maintenance procedures. Clean case parts as required according to the
following instructions.
CAUTION
CHEMICAL SPRAY -ON CLEANERS USED FOR APPLIANCES AND
OTHER HOUSEHOLD APPLICATIONS MAY DAMAGE THE FIN-
ISH. THESE
OR OTHER CHEMICAL CLEANERS SHOULD NOT BE
USED. DO NOT USE DETERGENTS THAT CONTAIN AMMONIA,
BENZENES, CHLORIDES,
OR ABRASIVES.
Clean case parts by wiping with a clean, lint-free cloth which has been dampened with a solution of
clean water and mild soap. A solution of
80% water and 20% isopropyl alcohol may be used for
heavily soiled areas.