Technical data

7-10 9050 Peripherals
The
LAN Unit has switches on the back. Ensure that they are set to 0 by putting them in the
following position.
LAN Unit Switches
Connections
Cabling information is in the configuration section.
Peripheral
General Configuration
Use the appropriate peripheral manual for information on switch settings.
Select
Code 7 is reserved for the SCM.
System console should use select code
O. The operating system expects to find it there.
Terminals
If necessary, change the following fields or switches to have the indicated values.
Local Echo
OFF
Caps Lock OFF
Xmit Fnctn(A)
NO
Inh Hnd Shk(G)
YES
Inh D2(H)
YES
Baud Rate
9600
Bits/Characters
8
Parity
NONE
Enq Ack
YES
Recv Pace XON/XOFF
Xmit Pace
XON/XOFF
Line/Block Mode Line
Return Def
CR
Remote
* ON
Auto LF
OFF
Display Functions
OFF
Disc Drives
Set the HP-IB address switch for the system disc drive to "0".
The suggested select code for the system disc HP-IB interface is 5 (Internal HP-IB or HP 27110).