Owner manual

EN Sending to an HP JetSend-enabled device 47
Sending to an HP JetSend-enabled device
If you see a function key labeled JETSEND, you can send documents
to JetSend-enabled devices.
HP JetSend is a communications technology built into printer and
scanner firmware and computer software. HP JetSend-enabled
devices can connect, “talk” to each other, and exchange information
directly from the network. It is server- and program-independent.
The digital sender is an HP JetSend-enabled device. You can use its
HP JetSend capabilities with the following types of devices:
printers on your company intranet that are HP JetSend enabled.
computers with HP JetSend for Windows software installed. You
can download a free copy of the HP JetSend for Windows
software for Windows NT or 95 from the HP JetSend website at
www.jetsend.hp.com.
Both types of devices must also have valid TCP/IP addresses.
Choosing or adding HP JetSend-enabled
devices
When you press JETSEND at the digital sender, a list of HP JetSend-
enabled devices appears. (The list contains up to 64 devices.) You
can choose a device from the list, or you can add a device.
To add a device to the list
1 Press JETSEND. The list of HP JetSend-enabled devices appears.
2 Press N
EW.
3 Type the DNS name or IP address for the HP JetSend-enabled
device you want to add. If you do not know this information, check
with the administrator.
4 Press O
K. The device is added to the list.
Note Once the list contains 64 devices, the NEW key disappears. Before
adding more devices, you must delete at least one existing device from
the list. To delete a device, use the and keys to select it and press
DELETE.