Owner manual

EN Sending to a computer 45
To send to your computer
Note At any time before pressing to send the document, you can press
or BACK to return to the main screen without saving any settings.
1 At the digital sender, log in (if prompted) and press PC.
2 If your name is in the NAME field, go to the next step.
- Or -
Type your name in the NAME field. (If you want to send to another
user’s computer, type the name of that user.)
3 The current Quality setting is shown in the upper right corner of
the display. For options and instructions on changing this setting
or the (paper) Size setting, see “Changing settings” on page 35.
4 Press to begin sending the document.
• If you sent a single-sided document using the ADF, the
process is finished.
• If you sent a double-sided document using the ADF, wait for
the first side to finish. Then, reload the document with the
second side facing up, last page on top, and press again.
• If you used the glass, remove the page when it is finished.
Then, place the next page face down on the glass and press
. After the last page, press S
END.
When the document arrives at your computer, it becomes a saved file
in your default inbox location. View and work with the document in the
target program or another program that accepts the file type specified
in your user profile.