Owner manual

EN Copying documents 43
To copy documents
Note At any time before pressing to send the document, you can press
or BACK to return to the main screen without saving any settings.
1 Log in (if prompted) and press C
OPY.
2 Using the and keys, choose the printer where you want to
print the copies and press .
3 In the Copies field, type the number of copies you want to make.
4 The current Quality setting is shown in the upper right corner of
the display. For options and instructions on changing this setting
or the (paper) Size setting, see “Changing settings” on page 35.
5 Press to begin sending the document.
• If you sent a single-sided document using the ADF, the
process is finished.
• If you sent a double-sided document using the ADF, wait for
the first side to finish. Then, reload the document with the
second side facing up, last page on top, and press again.
• If you used the glass, remove the page when it is finished.
Then, place the next page face down on the glass and press
. After the last page, press S
END.