Owner manual

24 Chapter 1 - Getting started EN
E-mailing a document
If you see a function key for e-mail on the main control panel screen,
you can e-mail a document directly from the digital sender. The main
screen is the first screen to appear, or it appears after you log in to the
digital sender.
To e-mail a document
1 Load a document, as described on page 22.
2 Log in (if prompted) and press E-M
AIL.
3 If your name is not already entered in the FROM field, type in your
user name or your e-mail address.
4 Press .
5 If you are a registered user and your user name is password
protected, a dialog box opens. Type your password and press
.
6 Type a message in the SUBJECT field (optional).
7 Press .
8 In the TO field, type an e-mail address.
- Or -
Type the name for the e-mail address you added in the “Using the
ABM to add an e-mail address” section on page 20.
9 Press . The e-mail address, preceded by “To: ”, appears in the
window below the TO field.
10 To CC someone:
a Press T
O. Press to select CC and press OK.
b In the CC field, type an e-mail address or choose an e-mail
destination from an address book.
c Press . The destination, proceeded by “CC:”, appears in
the window below the CC field.
11 Press . The document goes to the e-mail destinations you
chose.