Technical data
9020/9030/9040 Environmental/Installation/PM 2-13
512K RAM Board Installation Information
Instructions For HP-Qualified Personnel:
Follow the instructions that apply to the installation you are performing. For example,
if
you are
installing the
RAM
card
in
a 520 computer you would perform the steps that begin with: (ALL),
and
(520).
Load Board
Systems that are shipped from the Fort Collins Systems Division with 1 CPU. 1 lOP.
and
one
512K
Byte
RAM
Board,
will
also have a Load Board
in
the slot that
is
adjacent to the
RAM
board (top
occupied slot).
If
any other Finstrates, or
RAM,
is
added to this configuration, the Load Board must
be removed from the computer.
Any time the
Processor Stack configuration
is
reduced to 1 CPU, 1 lOP,
and
one
5l2K
Byte
RAM
Board, A Load Board (09855-66525)
is
required. Load Board (09855-66525)
is
a replaceable
part.
CE Handbook
When completed with the installation, insert this page
and
the following page
in
your CE
Handbook
(after page 2-12 of either the 9020 or 9030/9040 section).
Part Numbers
512K
Byte RAM (exchange)
(new)
Load Board
97047-69805
5061-6805
09855-66525