Installation guide

Chapter 2
Installing the Server
Using the RonI Model 17000 SP 400 Lifting Device
52
Figure 2-7 RonI Lifter
Step 1. Obtain the HP J1530C Rack Integration Kit Installation Guide before proceeding with the rack
mount procedure. This guide covers these important steps:
• Installing the anti-tip stabilizer kit (A5540A)
• Installing the ballast kit (J1479A)
• Installing the barrel nuts on the front and rear columns
• Installing the slides
Step 2. Follow the instructions on the outside of the server packaging to remove the banding and carton top
from the server pallet.