Installation guide

Chapter 1
HP Integrity rx7640 Server and HP 9000 rp7440 Server Overview
Detailed Server Description
38
MP/SCSI Board
Up to two MP/SCSI cards can be plugged into the server. At least one MP/SCSI board is required
(independent of partitions). An additional MP/SCSI board is required in a dual partition system. Both
MP/SCSI boards are oriented vertically and plug into the system backplane. The MP/SCSI board incorporates
a dual channel Ultra320 SCSI controller and is hot-pluggable.
Table 1-5 PCI-X Slot Types
I/O
Partition
Slot
a
a. Each slot will auto select the proper speed for the card installed up to the maximum speed for
the slot. Placing high speed cards into slow speed slots will cause the card to be driven at the
slow speed.
Maximum
MHz
Maximum
Peak
Bandwidth
Ropes
Supported
Cards
PCI Mode
Supported
0 8 133 533 MB/s 001 3.3 V PCI or PCI-X
Mode 1
7 133 1.06 GB/s 002/003 3.3 V PCI or PCI-X
Mode 1
6 266 2.13 GB/s 004/005 3.3 V or 1.5 V PCI-X Mode 2
5 266 2.13 GB/s 006/007 3.3 V or 1.5 V PCI-X Mode 2
4 266 2.13 GB/s 014/015 3.3 V or 1.5 V PCI-X Mode 2
3 266 2.13 GB/s 012/013 3.3 V or 1.5 V PCI-X Mode 2
2 133 1.06 GB/s 010/011 3.3 V PCI or PCI-X
Mode 1
1 133 1.06 GB/s 008/009 3.3 V PCI or PCI-X
Mode 1
1 8 133 533 MB/s 001 3.3 V PCI or PCI-X
Mode 1
7 133 1.06 GB/s 002/003 3.3 V PCI or PCI-X
Mode 1
6 266 2.13 GB/s 004/005 3.3 V or 1.5 V PCI-X Mode 2
5 266 2.13 GB/s 006/007 3.3 V or 1.5 V PCI-X Mode 2
4 266 2.13 GB/s 014/015 3.3 V or 1.5 V PCI-X Mode 2
3 266 2.13 GB/s 012/015 3.3 V or 1.5 V PCI-X Mode 2
2 133 1.06 GB/s 010/011 3.3 V PCI or PCI-X
Mode 1
1 133 1.06 GB/s 008/009 3.3 V PCI or PCI-X
Mode 1