Technical data

Introduction to nPartitions
parstatus Command
HP System Partitions Guide: Administration for nPartitions—rp7410
EMSP—[e-mail]
80
parstatus Command
The /usr/sbin/parstatus command displays information about the
partitions or hardware within a server complex. If you specify no
arguments, parstatus lists information about several of the major
components of the server complex.
You can specify an individual entity (cell, I/O chassis, cabinet, or
partition) to restrict the output to information about that component.
All users can issue this command.
See the parstatus (1) manpage for complete details.
Synopsis parstatus -s
parstatus -w
parstatus [-X]
parstatus [-A] [-M] -C|-I
parstatus [-M] -B|-P
parstatus [-M] -i IOchassis [-i...]
parstatus [-V|-M] -c cell [-c...]
parstatus [-V|-M] -b cabinet [-b...]
parstatus [-V|-M] -p PartitionNumber [-p...]
Options -s Indicate (through parstatus exit status) whether the
system is an HP server that supports nPartitions.
-w Display the partition number for the local partition.
-X Display the server complex’s attributes.
-A Only display the available resources in the complex.
-V Increase the amount of information displayed.
-M Produce output suitable for machine parsing.
-C Show information for all the cells in the complex.
-I Show information for all I/O chassis in the complex.
-B Show information for all cabinets in the complex.
HP Restricted / DRAFT
DRAFT NOV 2001