Technical data

Introduction to nPartitions
nPartition Requirements and Recommendations
HP System Partitions Guide: Administration for nPartitions—rp7410
EMSP—[e-mail]
52
Under this configuration, if the cell to which the PRI disk is connected
fails or is otherwise inactive, then if the HAA disk’s cell is available
the nPartition still can boot HP-UX.
Even if the PRI and HAA devices connect to the same cell (such as on
a multiple-partition HP rp8400 server), the HAA device can be used
to boot the partition to HP-UX should the PRI device fail.
HP Restricted / DRAFT
DRAFT NOV 2001