Technical data

Listing and Managing Server Hardware
Checking for Processor Failures
HP System Partitions Guide: Administration for nPartitions—rp7410
EMSP—[e-mail]
305
Any processors listed as “failed” either have failed self-tests or have been
software deconfigured by the Boot Console Handler (BCH) Configuration
menu’s CPUCONFIG command.
Partition Manager This procedure (Cell —> Show Cell Details menu, CPUs/Memory tab) lists
processor details and any failures using Partition Manager.
Step 1. Run Partition Manager (/opt/parmgr/bin/parmgr) or access it from
SAM or a Web browser.
Step 2. On the left of the primary window, select the partition to which the cell is
assigned, or select Available Resources if the cell is unassigned.
Step 3. On the right of the primary window, select the cell whose processor
details you want to list, then select the Cell —> Show Cell Details menu
item.
Step 4. Click the CPUs/Memory tab to display the processors installed in the
selected cell and list the status for each processor.
# parstatus -V -c5
[Cell]
Hardware Location : cab0,cell5
Global Cell Number : 5
Actual Usage : active base
Normal Usage : base
[CPU Details]
Type : 23664
Speed : 552 MHz
CPU Status
=== ======
0 ok
1 failed
2 ok
3 failed
CPUs
===========
OK : 2
Failed : 2
Max : 4
HP Restricted / DRAFT
DRAFT NOV 2001