Technical data

Listing and Managing Server Hardware
Listing the nPartitions in a Server
HP System Partitions Guide: Administration for nPartitions—rp7410
EMSP—[e-mail]
295
HP-UX Commands This procedure (parstatus -P) lists a server’s nPartitions from HP-UX.
Step 1. Log in to HP-UX running on any of the server’s partitions.
You can list all partitions from any partition in the server.
Step 2. Issue the parstatus -P command and option to list all nPartitions and
their current status.
Partition Manager This procedure (viewing the left side of the primary window) displays all
nPartitions in the server using Partition Manager.
Step 1. Run Partition Manager (/opt/parmgr/bin/parmgr) or access it from
SAM or a Web browser.
Step 2. Access Partition Manager’s primary window, and view the list of
nPartitions shown on the window’s left side.
Each nPartition is listed separately. Also listed here are the server’s
Available Resources, which are not assigned to any partition.
# parstatus -P
[Partition]
Par # of # of I/O
Num Status Cells Chassis Core cell Partition Name (first 30 chars)
=== ============ ===== ======== ========== ===============================
0 active 2 2 cab0,cell0 jules00
1 active 2 2 cab0,cell4 jules01
#
HP Restricted / DRAFT
DRAFT NOV 2001