Technical data

Listing and Managing Server Hardware
Listing the Server Product Number and Serial Number
HP System Partitions Guide: Administration for nPartitions—rp7410
EMSP—[e-mail]
285
Listing the Server Product Number and
Serial Number
You can list the product number and the serial number for your server
complex by using software commands and utilities.
You can perform this procedure using the following methods:
• Service Processor (GSP or MP) on page 285
This procedure (Command menu, ID command) lists the system
complex product number and serial number from the service processor.
• HP-UX Commands on page 286
This procedure (parstatus -X) lists a system complex’s product number
and its serial number from HP-UX.
• Partition Manager on page 287
This procedure (Complex —> Show Complex Details menu) lists the
system complex’s product and serial numbers using Partition
Manager.
Service Processor
(GSP or MP)
This procedure (Command menu, ID command) lists the system complex
product number and serial number from the service processor.
Step 1. Log in to the system’s service processor and enter CM to access the
Command menu.
Step 2. Issue the service processor Command menu’s ID command to display the
system complex information, including the product and serial numbers.
HP Restricted / DRAFT
DRAFT NOV 2001