Technical data

Listing and Managing Server Hardware
Listing Cell Processor and Memory Configurations
HP System Partitions Guide: Administration for nPartitions—rp7410
EMSP—[e-mail]
280
The following example shows the parstatus -V -c0 command’s output.
This presents detailed processor and memory info for cell 0 in cabinet 0.
Partition Manager This procedure (Cell —> Show Cell Details menu, CPUs/Memory tab) lists
cell processor and memory details from Partition Manager.
Step 1. Run Partition Manager (/opt/parmgr/bin/parmgr) or access it from
SAM or a Web browser.
Step 2. On the left of the primary window, select the partition to which the cell is
assigned, or select Available Resources if the cell is unassigned.
Step 3. On the right of the primary window, select the cell whose processor and
memory details you want to list, then select the Cell —> Show Cell Details
menu item.
Step 4. Click the CPUs/Memory tab to list the selected cell’s processor and
memory configurations.
# parstatus -V -c0
[Cell]
Hardware Location : cab0,cell0
Global Cell Number : 0
Actual Usage : active core
Normal Usage : base
Connected To : cab0,bay1,chassis3
Core Cell Capable : yes
Firmware Revision : 10.0
Failure Usage : activate
Use On Next Boot : yes
Partition Number : 0
Partition Name : feshd5a
[CPU Details]
Type : 5C70
Speed : 552 MHz
CPU Status
=== ======
0 ok
1 ok
2 ok
3 ok
CPUs
===========
OK : 4
Deconf : 0
Max : 4
[Memory Details]
DIMM Size (MB) Status
==== ========= =========
0A 512 ok
0B 512 ok
0C 512 ok
0D 512 ok
Memory
=========================
DIMM OK : 4
DIMM Deconf : 0
Max DIMMs : 32
Memory OK : 2.00 GB
Memory Deconf : 0.00 GB
#
HP Restricted / DRAFT
DRAFT NOV 2001