Technical data

Listing and Managing Server Hardware
Listing Cell Processor and Memory Configurations
HP System Partitions Guide: Administration for nPartitions—rp7410
EMSP—[e-mail]
275
Listing Cell Processor and Memory
Configurations
You can determine the processor and memory configurations for cells in a
server complex by using software tools and utilities.
You can perform this procedure using the following methods:
• Service Processor (GSP or MP) on page 275
This procedure (Command menu, PS command) lists cell processor
and memory configurations using the service processor Command
menu.
• BCH on page 276
This procedure (Information menu, PR and ME commands) lists cell
processor and memory configurations from a partition’s BCH
interface.
• HP-UX Commands on page 279
This procedure (parstatus command, with various options) lists cell
processor and memory configurations from HP-UX.
• Partition Manager on page 280
This procedure (Cell —> Show Cell Details menu, CPUs/Memory tab)
lists cell processor and memory details from Partition Manager.
Service Processor
(GSP or MP)
This procedure (Command menu, PS command) lists cell processor and
memory configurations using the service processor Command menu.
Step 1. Log in to the system’s service processor and enter CM to access the
Command menu.
You can check processor and memory details for any cell in the complex
from the service processor.
Step 2. Issue the PS command and specify the cell whose processor and memory
details you want to view.
HP Restricted / DRAFT
DRAFT NOV 2001