Technical data

Listing and Managing Server Hardware
Determining Hardware Power Status
HP System Partitions Guide: Administration for nPartitions—rp7410
EMSP—[e-mail]
264
Service Processor
(GSP or MP)
This procedure (Command menu, PS command) checks power status for
cabinets, bulk power supplies and power boards, cells, and core I/O using
the service processor.
Step 1. Log in to the system’s service processor and enter CM to access the
Command menu.
Step 2. Issue the service processor Command menu’s PS command.
The PS command can list detailed information—including power
status—for components within the system complex.
The PS command summarizes all cabinets, cells, and core I/O cards, and
prompts you to specify which hardware device you want information
about.
Step 3. Specify the cabinet whose hardware and power status you want to check.
For each cabinet (B), the PS command reports detailed information that
includes the power status for all components within the cabinet,
including:
• Cabinet Power—Whether the 48-volt cabinet power switch is on or
off, whether cabinet power is enabled, and details about power boards
and bulk power supplies.
• Cell Power—Whether power is enabled and on for all cells within
the cabinet.
GSP:CM> PS
This command displays detailed power and hardware configuration status.
The following GSP bus devices were found:
+----+-----+-----------+----------------+-----------------------------------+
| | | | | Core IOs |
| | | | | IO Bay | IO Bay | IO Bay | IO Bay |
| | | UGUY | Cells | 0 | 1 | 2 | 3 |
|Cab.| | | |IO Chas.|IO Chas.|IO Chas.|IO Chas.|
| # | GSP | CLU | PM |0 1 2 3 4 5 6 7 |0 1 2 3 |0 1 2 3 |0 1 2 3 |0 1 2 3 |
+----+-----+-----+-----+----------------+--------+--------+--------+--------+
| 0 | * | * | * |* * * * * * * * | * * | | | |
| 1 | | * | * |* * * * * * * * | * * | | | |
| 8 | | * | * | | * * | * * | | |
You may display detailed power and hardware status for the following items:
B - Cabinet (UGUY)
C - Cell
G - GSP
I - Core IO
Select Device:
HP Restricted / DRAFT
DRAFT NOV 2001