Technical data

Listing and Managing Server Hardware
Powering Cells and I/O Chassis On and Off
HP System Partitions Guide: Administration for nPartitions—rp7410
EMSP—[e-mail]
262
To power on or off an I/O chassis using Partition Manager, do so by power
cycling the cell to which it is connected.
Step 1. Run Partition Manager (/opt/parmgr/bin/parmgr) or access it from
SAM or a Web browser.
Step 2. Select the partition that contains the cell you want to power on or off.
Partitions are listed on the left side of the Partition Manager primary
window.
The cells and I/O chassis assigned to the partition are listed on the right
side of the primary window once the partition is selected.
Step 3. Select the cell whose power you want to turn on or off.
Step 4. Select the Cell —> Power On Cell menu item, or select the
Cell —> Power Off Cell menu item.
HP Restricted / DRAFT
DRAFT NOV 2001