Technical data

Listing and Managing Server Hardware
Powering Server Cabinets On and Off
HP System Partitions Guide: Administration for nPartitions—rp7410
EMSP—[e-mail]
257
When using the PE command enter B to power on or off a cabinet; specify
the cabinet number; and then enter ON (power on), OFF (power off), or Q
(quit without changing the power status).
GSP:CM> PE
This command controls power enable to a hardware device.
B - Cabinet
C - Cell
I - IO Chassis
Select Device: b
Enter cabinet number: 1
The power state is ON for Cabinet 1.
In what state do you want the power? (ON/OFF)
HP Restricted / DRAFT
DRAFT NOV 2001