Technical data

Procedures for Managing nPartitions
Restoring a Complex Profile
HP System Partitions Guide: Administration for nPartitions—rp7410
EMSP—[e-mail]
249
Step 3. Issue the CC command, select Last Complex Profile (L), and confirm that
you want to modify the Complex Profile configuration.
Step 4. Confirm that the nPartition cell assignments are what you intended to
establish.
Use the service processor Command menu’s CP command to display the
current complex profile configuration.
If the partition cell assignments are not what you intended—that is, if
you prefer the partition configuration you had before you restored the
existing partition configuration—you can repeat this procedure to
restore the configuration you had before beginning the procedure.
One level of undo is provided by the service processor Command menu’s
CC command. This allows you to undo your last partition change, and
undo your undo.
GSP:CM> CC
This command allows you to change the complex profile.
WARNING: You must either shut down the OSs for reconfiguration or
execute the RR (reset for reconfiguration) command for all
partitions before executing this command.
G - Build genesis complex profile
L - Restore last complex profile
Select profile to build or restore: L
Do you want to modify the complex profile? (Y/[N]) y
-> The complex profile will be modified.
GSP:CM>
GSP:CM> CP
--------------------------------------------------------------------------------
Cabinet | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7
--------+--------+--------+--------+--------+--------+--------+--------+--------
Slot |01234567|01234567|01234567|01234567|01234567|01234567|01234567|01234567
--------+--------+--------+--------+--------+--------+--------+--------+--------
PD 0 |X.X.....|........|........|........|........|........|........|........
PD 1 |....X.X.|........|........|........|........|........|........|........
PD 2 |.X.X....|........|........|........|........|........|........|........
PD 3 |.....X.X|........|........|........|........|........|........|........
GSP:CM>
HP Restricted / DRAFT
DRAFT NOV 2001