Technical data

Procedures for Managing nPartitions
Moving a Cell to a Different nPartition
HP System Partitions Guide: Administration for nPartitions—rp7410
EMSP—[e-mail]
247
You can perform these steps using either HP-UX commands or Partition
Manager.
Step 1. Refer to the procedure Removing Cells from an nPartition to remove the
cell that you want to move to the other nPartition.
As part of this step you perform a reboot for reconfig (shutdown -R) of
the nPartition to which the cell is originally assigned.
As a result of this step, the cell is unassigned (on the “free cell list” of
available resources) so is is available to be assigned to the other
nPartition in the next step.
Step 2. Refer to the procedure Adding Cells to an nPartition to assign the cell
you made available in Step 1 to its new nPartition.
This step also requires that you perform a reboot for reconfig
(shutdown -R) of the nPartition to which the cell is being added.
Following the reboot for reconfig, the cell is available (assigned and
active) in the new location.
HP Restricted / DRAFT
DRAFT NOV 2001